在线一本码道高清

How to choose the size of the toilet seat

Author: vhgevo 2020-01-08 17:04 [ look it ]: mpsarm.com

The important part of the toilet is the toilet lid. After the usage time reaches a certain number of years, it will inevitably cause failure or damage. Then the toilet lid must be replaced. So what are the size specifications of the toilet lid? How to choose?

What are the toilet lid specifications?

First, the shape of the toilet cover:

There are three types of toilet lids: O-shaped, U-shaped, and V-shaped. These three are very different and cannot be universally used.

For example, the U-shaped toilet and V-shaped toilet still have some differences in the outline and outline, and the toilet cover mainly plays a role in preventing odor. Due role. Therefore, the toilet cover should be selected according to the shape of the toilet. For different shapes of toilets, the corresponding toilet cover must be selected.

Second, the measurement of the size of the toilet lid:

We all know that there are differences in the size of the toilet cover. But ordinary toilet covers do not need to measure the size. They are sold in the building materials market, sanitaryware stores, and even supermarkets. They are special. If you need to change the toilet lid, you need to measure the size.

The method of measuring the size of the toilet cover is to first measure the length from the toilet tank surface to the foremost tip position of the toilet (that is, the length of the cover surface) along the toilet center line, and then measure the width of the toilet cover. The width is actually The degree of freedom is relatively large when selecting, so there will be no major problems during installation when there is an error in the measurement.

Finally, we can measure the mounting hole distance (distance between the mounting holes) of the toilet lid size, so there is basically no problem in selecting the measured size.

Three, toilet cover size:

1. U type: length 40-44cm, width 34cm, hole distance 11-17cm

2.V type: length 45-47cm, width 36cm, hole distance 11-17cm

What are the toilet seat size specifications
How to choose the size and size of the toilet lid (Image source: Photograph Network)

3. Type O: length 40-44cm, width 36cm, hole distance 11-17cm

4. Children's toilet cover: length 24-40cm, width 21-30cm, hole distance 8-12cm

How to buy a toilet lid?

1.Functional test

When we choose the toilet cover, every function of the product needs to be checked one by one. For example, its flushing setting and heating function must be considered. In addition, deodorization is different according to the strength of the use stage, so we It should be noted that automatic power saving and regular power saving can be set at the same time. Of course, when choosing, you must also consider energy saving and environmental protection, as well as the comfort of use.

Look at security

Buying techniques The higher the safety factor, the better: when purchasing a toilet cover, you must buy products that meet national safety standards, and require manufacturers to show relevant documents.

3. Is it easy to clean

When buying, you should observe the surface of the toilet cover, see if the light is flooded under the light, and then touch it to see if the light is clean and there is no obvious pinhole. Tap the lower surface with your hands to see the sound is crisp and pleasant. , No cracking sound, no shape deformation, etc.

4, see after-sales service

You need to know that the toilet cover repair is very troublesome, so when buying, you should pay attention to ask the shelf life. These questions must have relevant provisions, don't just listen to the shopping guide.

In order to prevent the toilet lid from being damaged, how to maintain it in daily life?

1. Do not place the toilet cover in a place exposed to direct sunlight or oil fume, or it will easily change color.

Second, the surface of the toilet lid can no longer be placed in the bucket, flower pots, etc. Otherwise, the surface of the toilet will be scratched, and may even cause cracks. In addition, the toilet cover and seat should be cleaned with a soft cloth, and must not be wiped with strong acids or carbon materials, which will cause its surface to be corroded.

Second, if the toilet cover is installed in a non-water tank or a low water tank, people cannot lean back during the construction process, which will break the toilet cover. Secondly, when the toilet lid is opened and closed, the action should be light, otherwise it is easy to leave marks and affect its beauty.

The above is all about "how to choose the size and specifications of the toilet cover", you can refer to it.

    Related hot word search:
    Comment
    comment

    Hot attention

    • Wedding
    • Decoration
    • Training
    • Learn to drive
    • tourism

    medical health

    • Information
    • Internal medicine
    • Gynecology
    • surgical
    • Andrology